New Equipment: Flatbeds

NEW Bradford Built "Steel" Flatbeds

Various Models in stock to fit Single Wheel and Dual Wheel Pickups and Cab Chassis, Louvered Headache rack with (2) Work lights, (2) Red lights & Clearance Lights in HR, Treadplate Steel Floor, Flush Mount Gooseneck Hitch Area with Lid and Ball, 6" Drop-Down Sides, Stake Pockets, Black powder coat paint finish, HD Rear Hitch with Receiver and D-Rings, 7-Way Plug

For More Information Call DTE Inc.

  NEW Bradford Built 4-Box Flatbed

102" Long & 112" Long x 96" Wide, To Fit 56"& 60" CA Dual Wheel, (4) Bolt in Lockable Tool Boxes w/Stainless Steel T-Handle Latches, Contoured HR w/Louvers and Open Center w/Wire Harness, (2) Red, White & (3) Clearance Lights, 6" Flip Down Sides w/Front & Rear Board Pockets (4) Tie Down Rings, Tapered Rear Skirt w/(4) Oval Red, (2) Oval White Clearance Lights & Wire Harness, License Plated Holder Built in to Bumper Receiver Hitch w/(2) D-Rings, Recessed 1/5 Wheel Hitch w/30,000# Ball & Flip Lid,7-RV Plug, Rear Plastic Brdford Mud Flaps,

For More Information Call DTE Inc.

NEW Cadet Western "Steel" Flatbeds

 8'6" Long x 84" Wide, (Fit a Single Wheel 56" CA"), 1/8" Steel Treadplate Floor, 4" Channel Iron Long Sills on 38" Centers, 40" High Rolled Tubing Header w/ SunShade, Side Pockets & Rub Rails, Back Step (Light Duty Hitch), LED Flush Mount Light Kit, Gooseneck Hitch with Ball

For More Information Call DTE Inc.

 Cadet Western "Steel" Flatbed

7' Long x 84" Wide, (Fit a Single Wheel 40" CA"), 1/8" Steel Treadplate Floor, 3" Structural Crossmembers, 4" Channel Iron Long Sills on 38" Centers, Heavy Duty Header w/SunShade, Side Pockets & Rub Rails, Back Step (Light Duty Hitch), 6-1/2" Tail Light Holes w/X-Metal Cover w/(2) S/T/T/Backup Lights, Gooseneck Compartment (No Ball)

For More Information Call DTE Inc.

 Cannonball Bale/Dump Flatbed

Various Sizes Available, Set up for Engine/ Hydraulic, Headache Rack w/Work Lights, Bolt on Receiver Hitch, Side Board Sets, Spinners, Flow Divider Kit (For Underhood Hydraulics), Black Paint, 1/5 Wheel Hitch, Ball & Trap Door Rated for #30,000, Wired Remote w/(4) Switches, Bed Has Dump Feature 6,000# Lift Capacity, Bale Float Feature 2,850 Lbs. Lift Capacity of Bale Arms, S/T/T & Backup Lights, Tie Down Rings on Bed Floor Corners, 2-Year Limited Warranty,

For More Information Call DTE Inc.

 Deweze "Anniversary" Bale Beds

(1) In Stock, Model 675 - Fits Single Wheel 56" CA, Length 8'6", Width 84", Headache Rack with Luevers & (2) Oval ST/T/Tail Lights, Rubber Coating on Bed Surface, Syncro Squeeze Cylinder, Dual Lift Cylinder Arms vs Single, Fifth Wheel Ball, Plate & Door, Heavy Duty Rear Reciever Hitch, Recessed Oval LED Stop, Turn, Tail & Backup Lights & Clearance Lights, Recessed Fuel Filler, Black Painted Bed, Grey Painted Arms & Tube Side Sections, 10 Gallon Reservoir Built Into Headboard, Mounting Kit, Spinners, Risers, Halogen Work Lights, Hydraulic Oil.

For More Information Call DTE Inc.

 Deweze "Anniversary" Bale Beds

Model 778 - Fits Dually 56" CA 1 Tons, Length 8'6" Tapered Front Corners, Width 96", Headache Rack with Luevers & (2) Oval ST/T/Tail Lights, Rubber Coating on Bed Surface, Syncro Squeeze Cylinder, Dual Lift Cylinder Arms vs Single, Fifth Wheel Ball, Plate & Door, Heavy Duty Rear Reciever Hitch, Recessed Oval LED Stop, Turn, Tail & Backup Lights & Clearance Lights, Recessed Fuel Filler, Black Painted Bed, Grey Painted Arms & Tube Side Sections, 10 Gallon Reservoir Built Into Headboard, Mounting Kit, Spinners, Risers, Halogen Work Lights, Hydraulic Oil.

For More Information Call DTE Inc.

Hillsboro Aluminum Flatbed 

Various Models in Stock To Fit Single Wheel and Dual Wheel Pickups Bolt on louvered Headache Rack, Extruded Aluminum Floor, " High Strength Alloy" Flush mount gooseneck hitch area & lid, Aluminum stake pockets w/rub rail, No rear hitch

Call DTE for More Information

 NEW Hillsboro Steel GII Truck Bed

Various Models in Stock to Fit Single & Dual Wheel Pickups & Cab Chassis, Louvered Headache Rack w/Sealed Beam Lights, Sealed Beam Lights Clearance, Side, Stop/Turn/Tail, Sealed Beam ID Lights in Rear of Bed, Dual Tag Lights, 6" Fold Down Sides w/Multiple Tie Locations - With Greaseable Hinge, Slam Latches & Rubber Bumpers, Board Holders Accross Front & Back of Bed, Inboard Stake Pockets, Mounting Plate w/26,000# Ball & Flush Mount Lid, Rear Tailboard w/Receiver Hitch, 7 Wire Trailer Socket, Enclosed Wiring Harness, Epoxy Primer w/Black Paint, 1/8" Steel Treadplate Floor, Mud Flaps

For More Information Call DTE Inc. 

 Knapheide Gooseneck Platform

Various Models in Stock to fit Single Wheel and Dual Wheel Pickups and Cab Chassis, Tapered Bulkhead with Screened Window and Oval B/U and S/T/T Lights, Stake Pockets and Rub Rails, Tapered Front Corners, Tapered Rear Corners, Gooseneck Compartment, Hitch and 2-5/16 Ball with Flush Access Door, (2) 7-Way Trailer Plugs (one in GN Door), 9' Dually Flatbed (Only) has Rear Receiver Hitch Included

For More Information Call DTE Inc.

Knapheide PGNC-116A

11' 6 "Long X 96" Wide, 84" CA Dual Rear Wheel, 12 Ga Tread plate Platform Floor, 12 Ga formed Cross Sills, Standard 16" on Center, 3/8" Rub Rail each side, 12 Ga Formed Rear Skirt/rear end rail combination, Gooseneck Hitch Rated @ 25,000 Lbs Gross Trailer Weight, 5,000 Lbs Tongue Weight, Mounting Kit, Platform Prime Paint, Complete Undercoating, Bulkhead 40 ½" Tall

Platform Lights: Oval Stop/Turn/Tail/Backup (2) White Backup Lights in Bulkhead (Incandescent), (2) White Backup Lights in Tailskirt (Incandescent), (2) Red Stop/Turn/Tail lights in Bulkhead (Incandescent), (2) Red Stop/Turn/Tail lights in Tailskirt (Incandescent)

Platform Lights Sealed Rectangular Lights (2) Amber Front Clearance Lights (Incandescent), (2) Red Rear Side Marker Lights (Incandescent), (2) Red Rear Clearance Lights (Incandescent), (3) Red RID Lights (Incandescent)

Receiver Hitch Integrated Class V, 2" Hitch Located at Rear of Platform, Trailer Wiring 7 Way Plug Located in Gooseneck Box and 7 way plug Located in Rear Skirt, 4 Underbody Tool Boxes With Stainless Steel Paddle Latch, Weight: 1,112lbs

PGNC-96A

9'6" "Long X 96" Wide, 60" CA Dual Rear Wheel-,12 Ga Tread plate Platform Floor, 12 Ga formed Cross Sills, Standard 16" on Center, 3/8" Rub Rail each side, 12 Ga Formed Rear Skirt/rear end rail combination, Gooseneck Hitch Rated @ 25,000 Lbs Gross Trailer Weight, 5,000 Lbs, Tongue Weight, Mounting Kit, Platform Prime Paint, Complete Undercoating, Bulkhead 40 ½" Tall

Platform Lights: Oval Stop/Turn/Tail/Backup (2) White Backup Lights in Bulkhead (Incandescent), (2) White Backup Lights in Tailskirt (Incandescent), (2) Red Stop/Turn/Tail Lights in Bulkhead (Incandescent), (2) Red Stop/Turn/Tail Lights in Tailskirt (Incandescent)

Platform Lights Sealed Rectangular Lights (2) Amber Front Clearance Lights (Incandescent), (2) Red Rear Side Marker Lights (Incandescent), (2) Red Rear Clearance Lights (Incandescent), (3) Red RID Lights (Incandescent)

Receiver Hitch Integrated Class V, 2" Hitch Located at Rear of Platform Trailer Wiring 7 Way Plug Located in Gooseneck Box and 7 way plug Located in Rear Skirt, 4 Underbody Tool Boxes With Stainless Steel Paddle Latch, Weight: 990lbs

 Knapheide PGNC-83A

8'3"L X 96"W, 56" CA Dual Rear Wheel, 12GA Treadplate Platform Floor, 12GA Formed Cross Sills, Standard 16" on Center, 3/8" Rub Rail each side, 12GA Formed Rear Skirt /Rear End Rail Combination, Gooseneck Hitch Rated @ 25,000lbs Gross Trailer Weight, 5,000lbs Tongue Weight, Mounting Kit, Platform Prime Paint, Complete Undercoating, Bulkhead 40-1/2" Tall.

Platform Lights: Oval Stop/Turn/Tail/Backup, 2 White Backup Lights in Bulkhead (Incandescent), (2) White Backup lights in Tailskirt (Incandescent), (2) Red Stop/Turn/Tail Lights in Bulkhead (Incandescent), (2) Red Stop/Turn/Tail Lights in Tailskirt (Incandescent)

Platform Lights Sealed Rectangular Lights (2) Amber Front Clearance Lights (Incandescent), (2) Red Rear Side Marker Lights (Incandescent), (2) Red Rear Clearance Lights (Incandescent), (3) Red RID Lights (Incandescent)

Receiver Hitch Integrated Class V, 2" Hitch Located at Rear of Platform Trailer Wiring 7 Way Plug Located in Gooseneck Box and 7 way plug Located in Rear Skirt, 4 Underbody Tool Boxes With Stainless Steel Paddle Latch, Weight: 800lbs